MENU

Light-oil burner KitAr1 for military use

Back to Burners for military use

Oroflam KitAr1 light-oil burner is specifically designed for the installation in military kitchens. It can replace OSIM OP/C1 burners and Karcher BFK-FC and BFK-KM burners.


It features an external tank to minimize the risk of fuel overheating and a built-in diesel filter. The centrally positioned side handles allow for easy transport by two people, while the rear handle allows for removal from its location in the military kitchen.


The flame can be regulated by adjusting both the combustion air flow to the combustion head and the pump pressure, which in turn controls the light-oil flow to the nozzle.


The burner operates at three power levels, selectable from the switch, based on the cyclical interruption of the flame over a four-minute period: 100%, 70% and 40%. A 20-minute post-purge ensures that the draught tube cools down, thus avoiding both the risk of breakage due to overheating of the burner parts exposed to the flame and the risk of overheating of the tank once the burner is fully inserted into its housing in the military kitchen.

Technical characteristics table
Nozzle Danfoss 0.40 GPH 60° S
Nozzle capacity 1,47 kg/h
Nominal heating power 15,000 kcal/h 17.4 kW
Power supply 24 V DC ±7% (direct current)
Motor power 60 W
Motor turns 2,800 rpm
Transformer Secondary 1 x 22 kV
Standard pump pressure 10 bar
Maximum power consumption 7.4 A / 178 W
Working power consumption 2.7 A / 65 W
Tank capacity 3,65 l
Autonomy at nominal heating power 2 h 25'
Weight with empty tank 26.8 kg
Permissible ambient temperature in operation* -2 °C ÷ +45 °C

*data considering the use of non-arctic diesel fuel

© 2026 OROFLAM s.r.l. - Made by Comunicanet